Accusize Industrial Tools N10 13-Pc Set H.S.S Annular Cutters, 1″ Depth of Cut, 3/4” in Weldon Shank, 2 Pilot Pins
Accusize Industrial Tools N10 13-Pc Set H.S.S Annular Cutters, 1” Depth of Cut, 3/4” in Weldon Shank, 2 Pilot Pins
Features
- With 3/4” Weldon shank
- Cutting Diameters range from 7/16″ to 1-1/16″
- Cutter Diameters: 7/16”, 1/2”, 9/16”, 5/8″, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, and 1-1/16”
- Sizes of ejector pin (pilot pin): 1/4″ x 3″.
- Depth of Cut: 1”
- Cut slotting and overlapping holes, and outside edge in steel correctly, quickly and safely.
- Compared to usual drill bits, it drills larger diameter holes up to 10 times faster.
- Made of tough and high-speed tool steel
- With the usage of lubricant, it gives machine-finish holes without the need of reaming.
- American Standard (ANSI)
- Unique strong case
Annular Cutters are outstanding for hole-making processes, with faster cutting speed, more long-lasting and better hole finishing. Since annular cutters take less horsepower, they are especially suitable for machines with lower power so that you could save time and use more potential cutting tools. Compared to standard twist bits, they drill much larger holes with less force and time. Accurate burr-free holes are produced with tight tolerances without pre-drilling or step drilling.
Solution of making holes on metal. They produce accurate burr-free holes to tight tolerances without pre-drilling or step drilling.
Why choose Annular Cutter Set of Accusize Industrial Tools?
Accusize N10 H.S.S Annular Cutter Set comes with cutters ranging from 7/16″ to 1-1/16″.
- Come with 2 pilot pins
- American standard (ANSI)
- 3/4″ Weldon shank
- 1-Inch depth of cut
- Really helpful cutting conditions available
- A lot of other sizes and depths of cut available
- Made from tough and high-speed tool steel
Features of High-speed Steel Annular Cutters
with Weldon shanks
An annular cutter is a type of drilling tool, which is also called a Rotabroach, core cutter, broach cutter, magnetic drill, mag drill, core drill, trepanning drill, hole saw and cup-type cutter.
They are outstanding for the hole-making process. These cutters only cut the outside edges of holes and they take less horsepower so they help save time for machines with lower power.
- Good for harder steel.
- Drill much larger holes and require less force and time than standard twist bits.
- Take less horsepower, suitable for lower power machines.
- Significantly faster than interpolating with an end mill.
- Much more long-lasting than twist drills or hole saws.
- Less expensive than indexable drills, twist drills, and end mills.
- Eject a ‘slug’, the cylindrical steel from the cutter’s center, after the hole is cut. Chips are produced from the outside cutting edges.
Cutting geometry
The cutting geometry improves the efficiency and drill life of the annular cutters.
- It increases cutting performance and reduces cutting force.
- The cutting angles are effective for general use in more than a few sorts of steel.
- The U-shaped recesses strengthen the chip removal performance.
- The special geometry of the recesses reduces the thermal load on the cutter since a number of the heat produced all through cutting is removed with the chips.
- The spiral-shaped guide chamfers reduce the friction between the core drill and the workpiece.
 |
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|---|
| Accusize N10 3/4″ Weldon Shank, 1″ DOC 13-Pc Set H.S.S Annular Cutters | Accusize HSS1-0000 3/4″ Weldon Shank, 1″ DOC 8-Pc Set H.S.S Annular Cutters | Accusize HSS3-0000 3/4″ Weldon Shank, 1″ DOC 8-Pc Set H.S.S Annular Cutters | Accusize 0519-0001 3/4″ Weldon Shank, 1″ DOC 8-Pc Set H.S.S Annular Cutters | Accusize AC01-1000 3/4″ Weldon Shank, 1″ DOC 7-Pc Set M35 Cobalt Annular Cutters | Accusize BC01-1000 3/4″ Shank, 1″ DOC 7-Pc Set TiN Coated H.S.S Annular Cutters | |
| Range | 7/16 to 1-1/16 inch | 7/16 to 1-1/16 inch | 9/16 to 1-1/16 inch | 9/16 to 13/16 inch | 9/16 to 15/16 inch | 9/16 to 15/16 inch |
| Cutting Depth | 1 inch | 1 inch | 1 inch | 1 inch | 1 inch | 1 inch |
| No. of cutters | 11 | 6 | 6 | 6 | 6 | 6 |
| No. of pilot pins | 2 | 2 | 2 | 2 | 1 | 1 |
| Package Type | Strong Plastic | Strong Plastic | Strong Plastic | Strong Plastic | Metal | Metal |
| Material | H.S.S | H.S.S | H.S.S | H.S.S | M35 Cobalt | H.S.S, TiN Coated |
Plastic Box
We almost finished upgrading the packaging box. In case you received the black cases, please leave us a message. We’ll ship you the blue strong case.
Make sure this fits by entering your model number.
Cutting Depth: 1”; Ansi Standard
Cuts holes in steel correctly, quickly & safely
Large holes can also be drilled up to ten times faster than regular drills bits
Make overlapping holes, slotting holes and edge cuts
Made from tough, high-speed tool steel
