Specification:
Conditon: 100% Brand New
Item Type: Marine Fuel Filter Water Separator
Material: Metal + Nylon
Model: S3227
Color: As Pictures Shown
Application: Outboard engine parts, fits for Yamaha, for Honda speedboats motorboats, and so on.
Length: Approx. 267mm/10.5in
Width: Approx. 102mm/4.0in
Height: Approx. 102mm/4.0in
To Drain Water:
1. Loosen self-venting drain plug to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with fuel.
4. Start engine and check insure there are no leaks.
To Replace :
1. Loosen self-venting drain plug and drain the into a container.
2. Put off filters from mounting bracket with bowl connected.
3. Put off bowl from filters and clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new, tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
8. Start engine and check to insure there are no leaks.
Package List:
1 x Fuel Filter Water Separator Assembly
2 x Connector
2 x Gasket
Note:
1.Draining of water or replacement of is decided by contamination level of fuel.2.Check up on the collection bowl for water day by day and service as important.3.Replace s at least one time a year or when a decrease of power is noticed.
Make sure this fits by entering your model number.
[ Function ] — Separates water from fuel, prevent water from rusting and abrading oil supply systems.10 micron filter cartridge, efficiently eliminates small particles and separates water from your fuel.Can reduce the frictional resistance between the fairly moving parts in the engine and reduce the wear of the parts.
[ Application ] — Fuel filter water separator, outboard engine parts, fits for Yamaha, for Honda speedboats motorboats, and so on.Easy to install and replace filter cartridge when required, convenient to make use of.
[ To Drain Water ] — ①Loosen self-venting drain plug to drain water from bowl into a container.②Tighten drain.③Use primer bulb to fill filter with fuel.④Start engine and check insure there are no leaks.
[ How To Use ] — ①Loosen self-venting drain plug and drain the into a container②Remove filters from mounting bracket with bowl connected③Remove bowl, and clean o-ring gland on bowl. Bowl is reusable, do not discard④Lubricate o-ring with oil and install on bowl⑤Install bowl onto new, tighten by hand⑥Lubricate filter top seal with oil or grease⑦Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand⑧Start engine to insure there are no leaks.
[ Please Note ] — ①Draining of water or replacement of is decided by contamination level of fuel.②Inspect the collection bowl for water day by day and service as important.③Replace s at least one time a year or when a decrease of power is noticed.
