Steel Dragon Tools 13pc. High Speed Steel HSS Annular Cutter Kit 1″ Depth and 7/16 in. to at least one-1/16 in.
The Steel Dragon Tools® 13-piece high-speed steel annular cutter kit includes 11 annular bits and two (2) pilot pins. These bits will quickly and safely cut holes in steel. The bits have a 1-inch cutting depth with a 3/4-inch Weldon shank. Bit sizes included: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15/16 in., 1 in., and 1-1/16 in.
Features:
Steel Dragon Tools® annular cutters will drill large holes as much as ten times faster than regular drills bits.
Machine-finish hole and not using a reaming needed when the usage of lubricant.
Make overlapping holes, slotting holes, and edge cuts.
Bit size is etched on every cutter.
Pilot pin helps locate center of hole location.
Pilot pin helps eject slug after drilling is complete.
Right through the drilling process, the pilot pin will retract into the cutter allowing lubrication to cut back heat gain within the slug.
Specifications:
Kit includes 11 high-speed steel annular cutters and two (2) pilot pins.
Bit sizes included: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15/16 in., 1 in., 1-1/16 in.
Inner Diameter:
7/16 in. Bit = 11/64 in.
1/2 in. Bit = 15/64 in.
9/16 in Bit = 1/4 in.
5/8 in. Bit = 5/16 in.
11/16 in. Bit = 3/8 in.
3/4 in. Bit = 13/32 in.
13/16 in. Bit = 31/64 in.
7/8 in. Bit = 35/64 in.
15/16 in. Bit = 39/64 in.
1 in. Bit = 21/32 in.
1-1/16 in. Bit = 23/32 in.
Cutting Depth: 1 in.
3/4 in. Weldon Shank
Pilot Pin: 3/16 in. x 3 in. (4.74 mm x 77 mm) (Used with 7/16 in. Bit)
Pilot Pin: 1/4 in. x 3 in. (6.34 mm x
Be certain that this fits by entering your model number.
Kit includes 11 high-speed steel annular cutters and two (2) pilot pins.
Bit sizes included: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15
Cutting Depth: 1 in.
Large holes will also be drilled as much as ten times faster than regular drills bits
